IML Resistograph




IML Australia Tree Test Instruments


	IML RESISTOGRAPH F-SERIES


	Drilling Resistance Measurement Instruments




		Click to enlarge



	Click to enlarge



	Click to enlarge



		Click to enlarge



		Click to enlarge

Small Instrument, Great Effect!
Resistograph F-Series

The IML Resistograph F-Series is driven by and operated by a Bosch drill and is very easy to handle. It has been designed for difficult operating conditions, including aerial drilling in upper sections of the tree such as the tree crown area.
The Resistograph F-Series allows you to evaluate the results of the measurement quickly and easily! The graph profile output is recorded on waterproof wax paper or downloaded to our new Bluetooth Electronic Unit at a scale of 1:1!

If the Resistograph is equipped with a Bluetooth Electronic Unit the user might as well download all information gathered during the day into a special computer program (F-Tools/ F-Tools Pro).
Graph profiles can then be downloaded into the computer for further analysis. There, the data can be stored for years and referenced as needed.

Resistograph Advantages:

Lightweight instrument works without cable, can be used
in any positions and is easy to handle
It takes only one minute for a measurement
Result on a water proof wax paper at a scale of 1:1
Portable equipment
Rechargeable batteries
Drilling below ground level - with the 45 degree adapter
without digging!

The Resistograph S-Version
Due to the harder wood species in the US, IML offers the F-Series
S-version of the base of the Resistograph. We only sell this version in Canada, the US and South America.

Below is more technical information regarding each instrument!

   with particularly solid needle support, thus very well suited
   for frequent application for hard wood

   available in the following drilling depths:
  130 mm (5.12 inch) / 280 mm (11.02 inch) / 380 mm (14.96 inch)
   480 mm (18.9 inch)

Technical Specification:
Models:	Resistograph F150S Resistograph F300S Resistograph F400S Resistograph F500S
Depths:	130 mm (5.12 inch) 280 mm (11.02 inch) 380 mm (14.96 inch) 480 mm (18.9 inch)
Drive Unit:	BOSCH Drill GSR 12V Professional
Result:	Wax paper strips
Resolution:	0.1 mm
Advanced Speed:	0-55 cm/min
Weight:	7 lbs - 9 lbs
Battery Charger:	110V
Batteries:	12V 2,0 AhNiCd 12V 2,4 AhNiCd 14,4V 2,4 AhNiCd
Electronic Unit:	Bluetooth-Electronic Unit
IML Software:	F-Tools / F-Tools Pro


	Read more about the Measuring Method

	Read more about the Bluetooth Electronic Unit

IML RESISTOGRAPH
	Measuring Method Drilling Resistance Measurement
	Bluetooth Electronic Unit IML Resistograph F-Series
	IML Software Center IML Resistograph F-Series

APPLICATION FIELDS
	Hazard Tree Inspection Wood Decay Detection Instruments for the Serious Arborist!
	Pole Inspection Replace No Pole Before Its Time!
	Timber Structures - Building Inspection - Termite Inspection - Bridge Inspection - Playground Equipment

DOWNLOADS
	IML Brochure Test and Measuring Instruments for Trees and Timber Structures
	Instructions for Use IML Resistograph F-Series
	Instructions for Use Bluetooth-Electronic Unit
	Application Videos (wmv-files)